Nikon D700 Firmware Update

Discussion in 'Digital Cameras & Equipment' started by mSummers, Jan 20, 2009.

  1. mSummers

    mSummers Member

    Nikon has released a firmware update for the D700. Here's what they fixed:

    Modifications enabled with A and B firmware Ver. 1.01

    * When Custom Setting a4 Focus tracking with lock-on was set to Off in Continuous-servo AF, the lens drive moved gradually without achieving focus. This issue has been resolved.
    * When the Speedlight SB-800 was mounted on the camera with flash mode set to Distance-priority manual (GN) mode, and then the exposure meters were reactivated or the camera was turned on, the distance information displayed on the SB-800 changed. This issue has been resolved.
    * When the Multi-Power Battery Pack MB-D10 was mounted on the camera and an EN-EL3e battery inserted in the camera but no batteries inserted in the MB-D10, and SB-900 flash mode set to TTL auto flash mode, the flash mode changed to A mode when the exposure meters turned off or were reactivated, or the camera was turned off or on. This issue has been resolved.(This issue has also been resolved with SB-900 firmware Ver. 5.02.)
    * An issue that, in extremely rare cases, resulted in noticeable black dots in images captured with Long exp. NR in the shooting menu set to On has been resolved.
    * Manamah, displayed in the Time zone options for the World time item in the setup menu, has been changed to Manama.
     
    Last edited by a moderator: Apr 11, 2014
  2. Scott

    Scott Member

    Well, it's about time they fixed this!!
     
    Last edited by a moderator: Apr 11, 2014
  3. Roger

    Roger Member Staff Member

    I was going to say the same thing!
     

Share This Page